free website stats program clutch lever has no pressure | Harley Davidson Forums

clutch lever has no pressure

Inferno Matt

New Member
I have a 1340cc with an Ultima 3 1/2 primary drive. I had taken off the belt and cog and replaced my Clutch plates. Put everything back together. But have no pressure at the clutch lever now. How do I go about bleeding it or do I just need to screw the springs in further ? any help on this would be greatly appreciated. - Inferno Matt
 
Bleeding it? Is it a hydraulic clutch? If it's a mechanical one, check and make sure the balls didnt come dislodged from the ramp mechanism under the right side tranny cover.
 
Back
Top