free website stats program '94 FXR query | Harley Davidson Forums

'94 FXR query

Bernie Perth WA

New Member
Can anyone tell me the internal tread size of the timing sensor plate mounting bolts to which the outer cover is attached, looking through the '93 -'94 HD manual, they show that the outer cover plate is pop rivetted to the mounting bolts, is this the case or did HD change to cap bolts to fasten the outer plate on.
If not then I'll drill and tap the mounting bolts to suit.
If anyone can help it would be much appreciated.
Regards,
Bernie.
 
I believe the screws are 8x32x1/2.It could also be a 10x24x1/2. I found those by looking at 1970 EG. They screw into the stud that holds the the timing plate(cam sensor) in the nose cone. When you use the screws they are at 3 & 9 o'clock,rivets were at 12 & 6. You will need to rotate the outer cover plate 90 deg. If you try to place the screws at 12&6 they will damage your cam sensor.
tourbox
 
Glad to have you aboard! :ws:rider
From Central Florida.
 
Welcome to the forum. On my 93' FXRS they are 10-24 x1/2. Hope this helps
 
Back
Top