2010 Dyna Starter problem

[joshjank81]

I have an issue with my 2010 Super Glide Custom. I turn the ignition on, turn the kill switch on and let the put cycle, when i go hit the starter switch it clicks a few times and the bike loses all power. The bike has about 3500 miles on it, and battary is good, the conections where tight and clean, and the fuses were good. Does any one have any idea what else the problem could be?

 

[R. Lewis]

I have an issue with my 2010 Super Glide Custom. I turn the ignition on, turn the kill switch on and let the put cycle, when i go hit the starter switch it clicks a few times and the bike loses all power. The bike has about 3500 miles on it, and battary is good, the conections where tight and clean, and the fuses were good. Does any one have any idea what else the problem could be?

Does she power back up after it sits a bit, Have you checked under your switches fro corrosion,what is the volts , amps and ohms reading?

 

[joshjank81]

I powered up once and after that nothing.

 

[Jack Klarich]

I powered up once and after that nothing.

take it in and make them fix it warranty issue here

 

[joshjank81]

Thanks for the help.