08 Fat Bob wont start

[nysoldierboy]

I have a 2008 Fat Bob that turns over but wont start. I've replaced the relays, and the coil. All of the fuses are fine. I'm just not getting a spark. I dont know anything about these fuel injected bikes I miss my carb. Can anyone help?

 

[chester1957]

Does it show any codes? Can you hear the fuel pump run for about 2-3 seconds when you turn the key on?

 

[nysoldierboy]

I dont know how to get codes but the fuel pum does run for a few sec.

 

[Hoople]

This should cover you.

2010 DTC Codes - Archive - Harley Davidson Community

Record any codes. Then clear them. Then attempt to start the bike. Possible crank sensor code may appear or re-appear.

 

[theklanchXL1200N]

This should cover you.

2010 DTC Codes - Archive - Harley Davidson Community

Record any codes. Then clear them. Then attempt to start the bike. Possible crank sensor code may appear or re-appear.

Do you have a fueler installed eg: V&H Fuelpak, Power Commander? If you do, unplug from the ECM and plug your stock harness in and see what happens. I had the same problem with my sporty and I got Crank Position Sensor codes....... But it was a faulty Fuelpak, that became faulty 2 years after I bought it.

My guess would be the CKS, or you're just plain out of gas!!!!!

 

[nysoldierboy]

It was the Power Commander. Thanks for all thye help.